Air / Water-Resistive Barriers & DrainageAdhesives & Base CoatsReinforcing MeshStucco Products
PermaLathPermaLath 1000Stuccobase
Stuccobase PremixPoly 1StuccoBond
Textured FinishesChroma FinishAcrylic Coatings & Primers
BASF Global|Construction Chemicals|Contact|Sitemap|Print
  Search
About Us|Sustainability|Wall Systems|Products|Literature|Colors & Textures|Tech Support|Distributors|Submittals
Home >> Products >> Stucco Products >> Stuccobase

Stuccobase 

Stuccobase

FINESTONE STUCCOBASE is a factory-blended mixture of Portland cement, reinforcing fibers, and other proprietary ingredients.

FINESTONE STUCCOBASE is a concentrate which requires the addition of 90.7–108.9 kg (200–240 lbs) of plaster sand conforming to ASTM C144 or ASTM C897 and 18.9–22.7 liters (5–6 gallons) of potable water.

FINESTONE STUCCOBASE conforms to ASTM C926, the standard specification for application of Portland cement-based stucco. It is a cement-based, fiber-reinforced base coat for Finestone Stucco System applications. Also listed in ICC-ESR-1064 for use with BASF Wall Systems PermaLath and PermaLath 1000.

.

 

 
Features Benefits
Superior weathering
properties		 Long-term durability
Proprietary formulation Improved moisture resistance and low water absorption
Fiber reinforced Resists shrinkage cracking when properly cured
Needs only addition of water Easy to mix and use with consistent results
Concentrated for use with local sand Economical
Literature Downloads
Product Bulletin
ICC-ESR 1064
Technical Bulletin:
Stucco Wall Systems
Test Results
MSDS
Uses
FINESTONE STUCCOBASE is designed for use with the Finestone Stucco Wall System. Acceptable substrates include:
  1. Concrete or unit masonry
  2. ASTM C1177 type sheathings, including e²XP™, GlasRoc®, DensGlass™, Securock™, Weather Defense™ Platinum and GreenGlass® sheathing  
  3. Water-resistant core gypsum sheathing (ASTM C79/ASTM C1396)
  4. Cement-board (ASTM C1325 Type A Exterior) at a minimum 1/2 inch thickness
  5. Fiberboard ANSI/AHA A 194-85
  6. Plywood complying with US DOC PS 1-95
  7. Expanded polystyrene insulation board complying with ASTM C578 Type IV with nominal density 1.5 lbs/ft³ extruded polystyrene
  8. Oriented strand board (OSB), complying with US DOC PS 2-95, to which a weather-resistive membrane and lath are attached.
Packaging Coverage
36.3 kg (80 lbs) per bag Coverage may vary depending upon surface conditions and application technique.
7.43–8.36 m² (80–90 ft²) per 80 lb bag at a thickness of 3/8" to 1/2".
DisclaimerCreditsData ProtectionCopyright 2008 BASF SE
BASFCC.Moss.Core.wsp 1.0.0.8 - S:38 T:5/23/2013 4:54:01 AM